Welcome to my blog

I made up the rear view system for the drivers side. I cut the base off the stock mirror to use as the mounting surface to attach to the car. I then aimed the camera and got it positioned how I wanted and held it…

Lot of little stuff today, I finished welding the exhaust up so the car is now nice and quiet. I then buffed out the paint and put a coat of wax on it. I didn't have any turtle wax so I ended up putting some…

The Inner fenders were a pain to get in without hurting the paint but they are both finally in. I bent them anywhere that they were getting close to the tire. There is plenty of room on the back end to clear even bigger tires.

The stock inner fenders on the convertible are long gone but the old xfi had good inner fenders that only had rust on the bottom half so they were cut out yesterday and today I managed to get one side installed. The hard part was…