Metro Information

I am slowly putting all the information I have gathered over the years and will post it here as I write it up. So far there is not much here but over time I will keep adding more and hopefully over time I will have a pretty useful database of information here.

No Responses to “Metro Information”

  1. Metro idles smooth for 5 seconds then rough for 3seconds, it will just keep cycling like this. Every now and then it will stall. Thanks ,tbucket

  2. I had this problem too. mine would all the sudden act like it was running out of gas sometimes too. I replaced the MAF. this makes sense because if MAF is intermittently bad, it will not sense accurate vac pressure, therefore cutting fuel back. do your homework on this if you buy it new, i found one for $145 at one place, $74 at another. got one at salvage for $5 🙂
    Brad

  3. NO need to replace the MAF sensor! Just clean off the small thin wires with electronics cleaner!!

  4. How can I tell if a 5 speed manual is XFI? Are there some numbers/codes on it.

    ken

  5. I would like to put 13 inch wheels on my metro , what fits it?? Bucket

  6. I am not sure where to post this, but I have a Metro XFi for sale. http://cgi.ebay.com/ebaymotors/Geo-Metro-XFi-Florida-Car-58-mpg-RARE-XFi-Edition-GREAT-RUNNING-NoRes_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem56352305b8QQitemZ370258675128QQptZUSQ5fCarsQ5fTrucks

  7. I have a 91 Metro Convertible and the turn signals do not work, the emergency flashers work fine though. I have checked the relay,the fuse panel,and the colum switch. I am at a loss as to what the problem could be. Any help would be appreaciated.

  8. I have gound my LSI cam to XFI specs. Will I need to replace the computer with an XFI one to get optimal gas mileage? Or anything else? Thanks.

Leave a Reply