The front crossmember had a lot of stuff welded to it and in general was a pretty good mess. I have most of the old frame cut off it except for one part. I will cut it off eventually but it makes a useful handle…
The back was mostly done except for some minor bracing and needing welded up completely. I finished it up and after it cooled off I put some paint on it. I will probably go over it one more time after the front is assembled and…
Last time I welded up the entire rear end solid before test fitting it to make sure everything looked just right. This time I learned my lesson and while it was just spot welded in place I put the trunk lid and tires on it…
With the marks on the floor it was pretty easy to just cut the suspension free and move it out to the new position. I mostly have it spot welded in place with whatever tubing I had laying around. I will test fit the tires…
Today the power was out most of the day and it was really hot in the garage so I didn’t get much accomplished. I have the positions laid out on the floor for where everything goes so I cut one side free and positioned it…