I completed the drivers side the same as the passenger side. It was much faster doing it the second time. After doing that it was time to move on and tie the sides together. The rear was easy, it was just weld a straight section…
I finished welding up the passenger side main frame rail. I put a bit of primer on the bare metal to protect it from rust. I then turned the car around and turned it up on it's other side so I could get at the…
Today I started building the new frame for the car. I am building the main structure out of 1.9" diameter 0.130 walled tube. I bent and made the rail for one side and have it tack welded in place.
Latest Updates Click here for a complete list of all posts for this project This is the project page for my Geo Metro XFi Convertible Project. My old XFi hatchback body was rusted out badly, and the unibody was starting to flex. I was planning…
I put the car back in the garage and turned it up on it's side. I cut away the rust on the passenger side and have it ready to lay out the new frame. I used a section of fence post that is about 1.6"…