This weekend has been a lot of things that don't photograph well again. I started with sealing up all the holes and gluing shut everything that is no longer being used in the car. I had to seal the cowl opening for fresh air and…
Figured I would put a quick post on here showing how the dashboard looks right now. I have the rear view mirror replacement screens mounted in the stock vent locations. The center of the dash has been more or less cut away and using the…
The Metro has the same transmission as the Suzuki Swift and several other cars made by Suzuki. All of them are more or less a bolt in swap. Usually the only difference is in the shifter rod or shifter brace rod. So if you get a junkyard trans take those two parts as well and you will have no problems.
The wiring harness was not that hard to install into the car. I have been labeling everything as I take it apart on the XFi so it was just a matter of fishing all the wire through the holes and into the interior. From there…
I was going over the car and noticed the way I had the floor made for the area behind the seats really was not going to work well with the duct through the car. So I cut it free and modified it slightly so the airflow will be cleanly directed to the back end of the car properly.