Rear frame nearly finished

The last two days I have been welding up the frame. Today I finally finished welding everything up and put a coat of paint on it to see what I had. The frame has most of the bracing done. I need to get some thin wall square tubing to put a few more braces in. I will do that before mounting the trunk lid since that is mostly what needs bracing.

IMAG0030IMAG0031IMAG0032IMAG0034

Now that the back is mostly done. I will clean and put the struts and suspension back on it in case I need to be able to move the car around before starting on the front end. I plan on using the Mustang II setup with modified lower control arms to get rid of the control rods. That will give me more room to extend the foot well area all the way up to the suspension.

Comments are closed.